Skip to content
(512) 843-7444|24/7 Emergency Dispatch|Commercial & Multifamily Only
CPS Energy Multifamily Upgrades Explained

CPS Energy Multifamily Upgrades Explained

CG Service ProsNovember 9, 20268 min read

Header image: illustration of the type of work described, not a photo of a CG Service Pros project.

The CPS Energy Multifamily Program covers eight upgrades for qualifying San Antonio apartment properties: water-saving showerheads, faucet aerators, Wi-Fi thermostats, attic insulation, LED bulbs, high-performance A/C tune-ups, air sealing, and window solar screens. CPS Energy says its incentives typically cover all or most of the cost of qualifying equipment. Which upgrades your property gets is decided by a no-cost assessment after you enroll.

Here is what each measure does, how they group, and which related work may cost the owner money. For eligibility and the approval process in one place, see our CPS Energy multifamily rebate guide.

The eight measures at a glance

MeasureWhere it goesWhat it addresses
Attic insulationAttic above unitsHeat gain in summer, heat loss in winter
Air sealingGaps and penetrations in the building shellDrafts and conditioned air leaking out
Window solar screensExterior of windowsSolar heat through glass
High-performance A/C tune-upsEach unit's A/C systemSystem efficiency and reliability
Wi-Fi thermostatsEach unitScheduling and temperature control
LED bulbsUnit lightingLighting energy use
Water-saving showerheadsUnit bathroomsHot water use
Faucet aeratorsUnit sinksWater flow

The trade ally page groups the work the same way contractors do: weatherization (attic insulation, air sealing, solar screens), HVAC service and maintenance, ENERGY STAR LED lighting, and low-flow water devices.

Building shell measures

Attic insulation

Insulation above the top floor slows heat moving through the roof. In San Antonio that mostly means less heat pouring into units in July and August, though residents feel it in cold snaps too.

Air sealing

Air sealing closes gaps around plumbing, wiring, attic hatches, and other openings where conditioned air escapes. It pairs naturally with insulation, since sealing usually happens before new insulation covers the attic floor.

Window solar screens

Exterior screens block part of the sun before it reaches the glass. They matter most on west- and south-facing windows.

From the field: "Shell work goes smoother when resident notices go out early and attic hatches and hallway closets are clear. Install-day delays usually come from locked units and missing keys, not the work itself."

CG's field team

Ask your trade ally which shell measures the assessment calls for on each building and how residents will be notified. The program verifies the work after installation, so plan for access twice: once for the install and once for verification.

HVAC measures

High-performance A/C tune-ups

A program tune-up is a diagnostic service on each unit's system, done with calibrated equipment. The trade ally page requires participating contractors to have proper tools and calibrated diagnostic equipment, which is part of why the work goes through approved trade allies.

Wi-Fi thermostats

Smart thermostats let residents set schedules and adjust from a phone. For the property, they also replace older thermostats that are often the source of comfort calls.

From the field: "A tune-up is a good time to look at the whole closet. A clogged filter, a blocked return or a drain line that has not been cleared affects comfort calls as much as the refrigerant readings do. Ask for tune-up notes by unit so maintenance can follow up."

CG's field team

Lighting and water measures

LED bulbs

LED bulbs replace incandescent or older bulbs in units. They last longer, which cuts down on bulb-change work orders.

Water-saving showerheads and faucet aerators

Low-flow devices reduce water and hot water use. They install quickly, usually during the same unit visit as other measures.

What may cost the owner money

CPS Energy lists upgrades that "may require a monetary investment": window replacement, window A/C units, ENERGY STAR appliances, duct replacement or repair, HVAC replacement, and custom measures. If the assessment suggests any of these, the LOI will show the cost before you sign.

The program does not post a public rate table. It says incentives vary based on equipment type and available funding. The real numbers for your property appear in the Letter of Intent from your trade ally, which lists the full scope and cost breakdown before work begins.

How the measures for your buildings get chosen

You do not pick from the list like a menu. CPS Energy describes the order: the property enrolls, receives a no-cost assessment that identifies qualifying upgrades, and the program team reviews those recommendations. The trade ally then writes the Letter of Intent with the full scope and cost breakdown, and the owner or manager signs it to reserve funds.

That means two properties of the same size can end up with different measure lists. An older building with thin attic insulation may get shell work first. A property with recently replaced windows may see less value in solar screens.

Questions worth asking at the assessment:

  • Which of the eight measures does the assessment recommend for each building, and why?
  • Does any recommended work fall into the categories that may need an owner investment?
  • How will unit access be scheduled, and how much notice will residents get?
  • What does post-installation verification involve for the property staff?

Write the answers into your project file. They make the LOI review faster.

Which measures to schedule in winter

Shell work is easier to schedule in the cooler months, since attic crews can work full days. Getting insulation, air sealing, and screens done by spring means they are in place before cooling season. Tune-ups are useful before the first hot stretch, so many properties schedule them in late winter or early spring.

Keep the timeline in mind. CPS Energy says installation typically takes 4 to 8 weeks after work is scheduled, and enrollment and the LOI come first. A property that enrolls in November or December is in a good position to finish shell work before summer.

Who qualifies

The measure list only matters if the property qualifies. The four rules: at least 25% of units occupied by tenants using rental or income-qualifying assistance, or 501(c)(3) ownership; individually metered units with CPS Energy service; 10 years or older; five or more units. Our post on CPS Energy Multifamily Program eligibility walks through each one.

How payment works with CG

CG Service Pros is a participating trade ally in the CPS Energy Multifamily Program. CPS Energy pays the trade ally once the final invoice and W-9 are in, typically within 6 to 8 weeks. CG collects that payment directly from the program at the end of the job. If any recommended work falls outside the covered measures, the LOI shows the owner's share on its own line before you sign, so the property knows its cost before funds are reserved.

Frequently Asked Questions

What upgrades does the CPS Energy Multifamily Program cover?

Water-saving showerheads, faucet aerators, Wi-Fi thermostats, attic insulation, LED bulbs, high-performance A/C tune-ups, air sealing, and window solar screens.

Do residents pay anything?

The program is set up for the property. CPS Energy says incentives typically cover all or most qualifying equipment costs, and any owner share appears in the Letter of Intent before work starts.

Does the program pay for HVAC replacement?

CPS Energy lists HVAC replacement and duct replacement or repair among upgrades that may require an investment from the owner. The assessment and LOI will show what applies.

Who decides which upgrades a property gets?

A no-cost property assessment after enrollment recommends upgrades, and the program team reviews them before the trade ally writes the LOI.

How much are the incentives?

CPS Energy does not publish a rate table for the program. Incentives vary by equipment type and available funding, and your LOI lists the actual amounts.

Who installs the upgrades?

An approved, registered trade ally does all the work. You can choose your own or work with a participating contractor.

Next step

CG Service Pros has handled rebate projects for more than five years and completed more than 4,500 multifamily units in a single year. If your San Antonio property qualifies, request an assessment through our San Antonio multifamily page and we will walk you through the measure list for your buildings. In San Antonio, we work only in the CPS Energy Multifamily Program.

Sources

Program details checked November 2, 2026:

Share this article